Sabtu, 03 Oktober 2015

Update A300HXXU1AOA4 Android 4.4.4 KitKat Firmware download Galaxy A3 SM-A300H [Complete Tutorial]

A300HXXU1AOA4 Android 4.4.4 KitKat official android firmware download for
Samsung Galaxy A3 SM-A300H is out and the users can now manually download the firmware zip file from here at
NasirTech. Samsung time to time releasing software update for all their Android
Smartphone and tablet devices and it is always recommended to update the latest
available firmware for your device as with every new firmware version Samsung introduces fixes
for bugs (if any), improvement in overall OS performance and sometime introduces
new features. Continue reading this page to find A300HXXU1AOA4 download
link along with flashing instructions and rooting guide (if available).

Samsung Galaxy A3 SM-A300H
 
 
 
 
 
 
 
 
 
 

A300HXXU1AOA4 Firmware Details:

Model: SM-A300H
Model Name: Samsung Galaxy A3
Version: Android 4.4.4 KitKat
PDA: A300HXXU1AOA4

A300HXXU1AOA4 Download Link (s):

Note that: you can flash/install any firmware from the below list if the firmware for your country is not available, except those firmware comes with their carrier name.Egypt: A300HXXU1AOA4_A300HOJV1AOA2_EGY.zip
 
 
 
 
 
 
 
 
 
 
(Firmware for rest of the countries and carrier will be added here when available)
 
[Please don't ask for any torrent download link for the above firmware. However, if the above link doesn't work, you can mention in comment below, we'll try to provide you with other download mirror (if available)]

A300HXXU1AOA4 Installation Methods:

There are several ways by which you can update the XXU1AOA4 firmware on your Galaxy A3 A300H such as- through Samsung Kies utility (from your PC), Via OTA (Over the Air, directly from your device using WiFi) and Odin method (manually download firmware and flash through Odin). Below you'll find all the three methods. 

How to Update Official Firmware on Galaxy A3 SM-A300H via OTA (Over the Air):

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Go to Settings-About, and tap on the Update Option from there (If its show “The latest update have already been installed” message, then your device haven’t receive any OTA yet, check back later or try installing through Kies.)
  3. Tap OK to start the download and installation process
  4. Once done, your device will reboot automatically

How to Update Official Firmware on Galaxy A3 SM-A300H through Samsung Kies Utility:

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Download and Install Samsung Kies Utility on your PC
  3. Connect your device to PC through USB
  4. Open/Run Samsung Kies, it should automatically detect your device
  5. At the Samsung Kies home screen, you’ll see New Firmware Upgrade is available notification (If it show- “This is the last firmware”, then your device haven’t received the latest firmware on Kies, check back later or try flashing manually through Odin)
  6. Click on the Firmware Upgrade button to start the update process
  7. Follow onscreen instructions
  8. Once done, your device will be reboot automatically
  9. After reboot, you can disconnect your device from PC

How to Update A300HXXU1AOA4 Firmware on Galaxy A3 A300H through Odin:


Kies and OTA are the official way to update firmware but most of us prefer manual way
to update official firmware. So, below you’ll find step by step manual
guide to update the XXU1AOA4 4.4.4 KitKat firmware on your Galaxy A3 A300H
through Odin software on your PC or Laptop.

Warning!

"The firmware is released only for the Samsung Galaxy A3 SM-A300H model, so don’t try this in any other android
device. Check your device model number from Settings-About Phone. Also
the tutorial is based on Windows PC. NasirTech is not responsible if
anything wrong happens to your device after following this guide, try
this at your own risk".

Points to be noted:

1) Check battery percentage, your device should have at least 60% battery
power
 
2) Turn on USB Debugging mode, go to Settings-General-Developer
Options (As the Developer options are hidden by default on all Android
device running on Android 4.2 or up, So go to Settings-General-About on
your Galaxy A3 and tap Build Number for 7 times to visible the
Developer options.) See the image below.
 
Enable Developers Options
 
3) Backup important data and settings to external storage- follow this guide
 
4) Install USB driver for your device on your PC/Laptop- Download Samsung USB Driver  
 
5) If your Galaxy A3 A300H have any Custom ROM
installed such as- CyanogenMod ROM, ParanoidAndroid ROM, AOKP ROM, SLIM
ROM, PACman ROM, Avatar ROM, Omni ROM, LiquidSmooth ROM, Beanstalk ROM,
Carbon ROM etc, then it’ll be replaced by stock firmware.
 
6) Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock
Recovery
 
7) After flashing official firmware, your device will no longer belongs to
rooted device. However you can root your device any time after flashing the
firmware.

Steps to update A300HXXU1AOA4 4.4.4 KitKat firmware on Galaxy A3 A300H through Odin: 

1) Download XXU1AOA4 4.4.4 KitKat firmware for Galaxy A3 A300H from the above download section
 
2) Download Odin 3.09
 
3) Switch off and boot Galaxy A3 A300H into Download Mode by
pressing and holding the Volume Down+Home+Power buttons (long press until the boot
screen appear), now press Volume Up key to proceed to Download Mode.  
 
4) Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as
an administrator (Right click on the .exe file and click on Run as
administrator)
 
5) Now connect your Galaxy A3 A300H to your computer via USB cable
 
6) In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM
section and “Added!” text at the message box. This means your device has been
detected by Odin3.
 
7) Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked in Odin.
 
8) Now, extract the downloaded firmware zip file, you’ll find a firmware file
with extension .tar.md5
 
9) In Odin screen, click on AP (PDA in older Odin) button and select the firmware file with
.tar.md5 extension (The firmware file look something like:
A300HXXDLJ5_A300HODDDLI7_INU.tar.md5)
 
10) Now, click on the Start button to begin the installation process, wait few
moments.
 
Odin3
 
11) Once completed, you would see “PASS!” message in ID:COM port having green
background
 
12) Your device should automatically reboot after completion
 
13) You can now disconnect your device from computer
 
14) Finish

Root E250LKLUKNL1 Android 4.4.2 Stock Firmware download On Galaxy Note 2 SHV-E250L - Simple Tutorial

A simple method to root E250LKLUKNL1 Android 4.4.2 KitKat Stock android firmware download is now available at NasirTech. Samsung Galaxy Note 2 LTE SHV-E250L (Korea LG+) recently get updated to the E250LKLUKNL1 4.4.2 KitKat Firmware. Continue reading the tutorial for complete guide.







After updating official firmware, your device no longer belongs to rooted device. So, after official firmware update, many of us prefer to root our device to enjoy
some additional features that unrooted android device doesn't offer. With a
rooted android device, you can install apps that ask root permission, flash
various custom ROMs, install MODs and tweak various features. Root removes
default bloatware apps that free-up lots of memory space and extend the battery
life. However, once rooted, manufacturer warranty will be void. But
you can regain the warranty by following proper unroot process.



So,
want to root Galaxy Note 2 SHV-E250L Running E250LKLUKNL1 4.4.2 KitKat Firmware? Continue reading this page to get all the
necessary steps to successfully root your device. The root file (CF-Auto-Root)
we used in this tutorial is safe and have nearly 100% success rate. We'll use
Odin software to flash the root file.
The
tutorial is made with simple step by step guide, so that even an android newbie
user can follow and successfully root his/her device. However, in this process
you may loss your personal data and settings. So, we recommend you to follow all
the backup instructions before proceed to rooting guide.

Warning!

  • This rooting tutorial is only applicable for Samsung Galaxy Note 2 SHV-E250L
    model (t0ltelgt). So, don't try this in any other android device. Check your device model
    number from- Settings-About Phone. 
  • Rooting voids your phone's manufacturer warranty. However, you can get back
    the warranty anytime by following proper unroot process or by flashing official firmware.
  • This guide is for educational purpose and you should try this at your own
    risk. We are not responsible if your device experience a soft brick after
    following this tutorial.

Pre-Requisites:

  • Check battery percentage, charge your device to a decent level of at
    least 60% battery power. Your device should not turn
    off during installation.
  • Turn on USB Debugging mode,
    go to Settings-Developer Options-USB
    Debugging
  • Backup important data and
    settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver
All the above pre-requisites are very important and must be followed
before proceed to installation guide. Hope you get all the above points
and done as mentioned. Now, you are ready to move to the final step of
this tutorial where we have arranged a step by step details guide to root Galaxy Note 2 SHV-E250L running  E250LKLUKNL1 4.4.2 KitKat firmware.

Steps to Root Galaxy Note 2 SHV-E250L Running E250LKLUKNL1 4.4.2 KitKat through Odin:



  1. Download
    CF-Auto-Root for Galaxy Note 2 E250L and extract the Zip file: CF-Auto-Root-t0ltelgt-t0ltelgt-shve250l.zip
  2. Download Odin 3.09 and extract the Zip file: Odin3_V3.09.Zip
  3. Now, Switch off your phone and boot Galaxy Note 2 E250L
    into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot
    screen appear), now press Volume
    Up     key to proceed to Download Mode.
  4. Run the Odin3
    v3.09.exe     file as an administrator (Right click on the .exe file and click on
    Run as administrator)
  5. Now connect your Galaxy Note 2 E250L to your computer via USB
    cable
  6. In Odin3 screen, you should see a COM Port number
    like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your
    device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, click on the AP button and select the CF-Auto-Root-t0ltelgt-t0ltelgt-shve250l.tar.md5 file.
  9. Finally, click on the Start button to begin the rooting process, wait
    few moments.
  10. Once completed, you would see “PASS!” message in ID:COM port having green
    background
  11. Your phone should automatically reboot after
    completion
  12. You can now disconnect your phone from
    computer
  13. Finish

Root N5110ZTCNL6 Android 4.4.2 Stock Firmware download On Galaxy Note 8.0 GT-N5110 - Simple Tutorial

A simple method to root N5110ZTCNL6 Android 4.4.2 KitKat android firmware download is now available at NasirTech. Samsung Galaxy Note 8.0 GT-N5110 recently get updated to the N5110ZTCNL6 4.4.2 KitKat Firmware. Hope you updated this latest firmware on your device and now you can root the same using our simple tutorial below. The below guide will help you to root ZTCNL6 4.4.2 KitKat Firmware running on Galaxy Note 8.0 GT-N5110. Continue reading the tutorial for complete guide.

 
 
 
After updating official firmware, your device no longer belongs to rooted device. So, after official firmware update, many of us prefer to root our device to enjoy
some additional features that unrooted android device doesn't offer. With a
rooted android device, you can install apps that ask root permission, flash
various custom ROMs, install MODs and tweak various features. Root removes
default bloatware apps that free-up lots of memory space and extend the battery
life. However, once rooted, manufacturer warranty will be void. But
you can regain the warranty by following proper unroot process.

 
So,
want to root Galaxy Note 8.0 GT-N5110 Running N5110ZTCNL6 4.4.2 KitKat Firmware? Continue reading this page to get all the
necessary steps to successfully root your device. The root file (CF-Auto-Root)
we used in this tutorial is safe and have nearly 100% success rate. We'll use
Odin software to flash the root file.
The
tutorial is made with simple step by step guide, so that even an android newbie
user can follow and successfully root his/her device. However, in this process
you may loss your personal data and settings. So, we recommend you to follow all
the backup instructions before proceed to rooting guide.

Warning!

  • This rooting tutorial is only applicable for Samsung Galaxy Note 8.0 GT-N5110
    model (konawifi). So, don't try this in any other android device. Check your device model
    number from- Settings-About Tablet. 
  • Rooting voids your Tablet's manufacturer warranty. However, you can get back
    the warranty anytime by following proper unroot process or by flashing official firmware.
  • This guide is for educational purpose and you should try this at your own
    risk. We are not responsible if your device experience a soft brick after
    following this tutorial.

Pre-Requisites:

  • Check battery percentage, charge your device to a decent level of at
    least 60% battery power. Your device should not turn
    off during installation.
  • Turn on USB Debugging mode,
    go to Settings-Developer Options-USB
    Debugging
  • Backup important data and
    settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

All the above pre-requisites are very important and must be followed
before proceed to installation guide. Hope you get all the above points
and done as mentioned. Now, you are ready to move to the final step of
this tutorial where we have arranged a step by step details guide to root Galaxy Note 8.0 GT-N5110 running  N5110ZTCNL6 4.4.2 KitKat firmware.

 Steps to Root Galaxy Note 8.0 GT-N5110 Running N5110ZTCNL6 4.4.2 KitKat through Odin:

 

  1. Download
    CF-Auto-Root for Galaxy Note 8.0 N5110 and extract the Zip file: CF-Auto-Root-konawifi-konawifixx-gtn5110.zip
  2. Download Odin 3.09 and extract the Zip file: Odin3_V3.09.Zip
  3. Now, Switch off your Tablet and boot Galaxy Note 8.0 N5110
    into Download Mode by pressing and holding the Volume Down+Power buttons together (long press until the boot
    screen appear), now press Volume
    Up     key to proceed to Download Mode.
  4. Run the Odin3
    v3.09.exe     file as an administrator (Right click on the .exe file and click on
    Run as administrator)
  5. Now connect your Galaxy Note 8.0 N5110 to your computer via USB
    cable
  6. In Odin3 screen, you should see a COM Port number
    like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your
    device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, click on the AP button and select the CF-Auto-Root-konawifi-konawifixx-gtn5110.tar.md5 file.
  9. Finally, click on the Start button to begin the rooting process, wait
    few moments.
  10. Once completed, you would see “PASS!” message in ID:COM port having green
    background
  11. Your Tablet should automatically reboot after
    completion
  12. You can now disconnect your Tablet from
    computer
  13. Finish

Install G7105XXUBNL1 Android 4.4.2 KitKat Firmware download on Galaxy Grand 2 SM-G7105 [Full Tutorial]

G7105XXUBNL1 Android 4.4.2 KitKat official android firmware download for
Samsung Galaxy Grand 2 SM-G7105 is out and the users can now manually download the firmware zip file from here at
NasirTech. Samsung time to time releasing software update for all their Android
Smartphone and tablet devices and it is always recommended to update the latest
available firmware for your device as with every new firmware version Samsung introduces fixes
for bugs (if any), improvement in overall OS performance and sometime introduces
new features. Continue reading this page to find G7105XXUBNL1 download
link along with flashing instructions and rooting guide (if available).





G7105XXUBNL1 Firmware Details:

Model: SM-G7105
Model Name: Samsung Galaxy Grand 2
Version: Android 4.4.2 KitKat
PDA: G7105XXUBNL1

G7105XXUBNL1 Download Link (s):

Note that: you can flash/install any firmware from the below list if the firmware for your country is not available, except those firmware comes with their carrier name.Greece: G7105XXUBNL1_G7105EURBNL1_EUR.zip
Poland: G7105XXUBNL1_G7105XEOBNL1_XEO.zip
(Firmware for rest of the countries and carrier will be added here when available)
[Please don't ask for any torrent download link for the above firmware.
However, if the above link doesn't work, you can mention in comment
below, we'll try to provide you with other download mirror (if
available)]

G7105XXUBNL1 Installation Methods:

There are several ways by which you can update the XXUBNL1 firmware on your Galaxy Grand 2 G7105 such as- through Samsung Kies utility (from your PC), Via OTA (Over the Air, directly from your device using WiFi) and Odin method (manually download firmware and flash through Odin). Below you'll find all the three methods. 

How to Update Official Firmware on Galaxy Grand 2 SM-G7105 via OTA (Over the Air):


  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Go to Settings-About, and tap on the Update Option from there (If its show “The latest update have already been installed” message, then your device haven’t receive any OTA yet, check back later or try installing through Kies.)
  3. Tap OK to start the download and installation process
  4. Once done, your device will reboot automatically

How to Update Official Firmware on Galaxy Grand 2 SM-G7105 through Samsung Kies Utility:

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Download and Install Samsung Kies Utility on your PC
  3. Connect your device to PC through USB
  4. Open/Run Samsung Kies, it should automatically detect your device
  5. At the Samsung Kies home screen, you’ll see New Firmware Upgrade is available notification (If it show- “This is the last firmware”, then your device haven’t received the latest firmware on Kies, check back later or try flashing manually through Odin)
  6. Click on the Firmware Upgrade button to start the update process
  7. Follow onscreen instructions
  8. Once done, your device will be reboot automatically
  9. After reboot, you can disconnect your device from PC

How to Update G7105XXUBNL1 Firmware on Galaxy Grand 2 G7105 through Odin:

Kies and OTA are the official way to update firmware but most of us prefer manual way
to update official firmware. So, below you’ll find step by step manual
guide to update the XXUBNL1 4.4.2 KitKat firmware on your Galaxy Grand 2 G7105
through Odin software on your PC or Laptop.

Warning!

"The firmware is released only for the Samsung Galaxy Grand
2 SM-G7105 model, so don’t try this in any other android device. Check
your device model number from Settings-About Phone. Also the tutorial
is based on Windows PC. NasirTech is not responsible if anything wrong
happens to your device after following this guide, try this at your own
risk".

Points to be noted:

1) Check battery percentage, your device should have at least 60% battery
power
2) Turn on USB Debugging mode, go to Settings-General-Developer
Options (As the Developer options are hidden by default on all Android
device running on Android 4.2 or up, So go to Settings-General-About on
your Galaxy Grand 2 and tap Build Number for 7 times to visible the
Developer options.) See the image below.
Enable Developers Options
3) Backup important data and settings to external storage- follow this guide
4) Install USB driver for your device on your PC/Laptop- Download Samsung USB Driver  
5) If your Galaxy Grand 2 G7105 have any Custom ROM
installed such as- CyanogenMod ROM, ParanoidAndroid ROM, AOKP ROM, SLIM
ROM, PACman ROM, Avatar ROM, Omni ROM, LiquidSmooth ROM, Beanstalk ROM,
Carbon ROM etc, then it’ll be replaced by stock firmware.
6) Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock
Recovery
7) After flashing official firmware, your device will no longer belongs to
rooted device. However you can root your device any time after flashing the
firmware.

Steps to update G7105XXUBNL1 4.4.2 KitKat firmware on Galaxy Grand 2 G7105 through Odin: 

1) Download XXUBNL1 4.4.2 KitKat firmware for Galaxy Grand 2 G7105 from the above download section
2) Download Odin 3.09
3) Switch off and boot Galaxy Grand 2 G7105 into Download Mode by
pressing and holding the Volume Down+Home+Power buttons (long press until the boot
screen appear), now press Volume Up key to proceed to Download Mode.  
4) Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as
an administrator (Right click on the .exe file and click on Run as
administrator)
5) Now connect your Galaxy Grand 2 G7105 to your computer via USB cable
6) In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM
section and “Added!” text at the message box. This means your device has been
detected by Odin3.
7) Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked in Odin.
8) Now, extract the downloaded firmware zip file, you’ll find a firmware file
with extension .tar.md5
9) In Odin screen, click on AP (PDA in older Odin) button and select the firmware file with
.tar.md5 extension (The firmware file look something like:
G7105XXDLJ5_G7105ODDDLI7_INU.tar.md5)
10) Now, click on the Start button to begin the installation process, wait few
moments.
Odin3
11) Once completed, you would see “PASS!” message in ID:COM port having green
background
12) Your device should automatically reboot after completion
13) You can now disconnect your device from computer
14) Finish

Root G900IZTU1BOA1 Android 5.0 Stock Firmware Download On Samsung Galaxy S5 SM-G900I - Simple Tutorial

A simple method to root G900IZTU1BOA1 Android 5.0 Lollipop android firmware download is now available. Samsung Galaxy S5 SM-G900I recently get updated to the G900IZTU1BOA1 5.0 Lollipop Firmware. Hope you updated this latest firmware on your device and now you can root the same using our simple tutorial below. The below guide will help you to root ZTU1BOA1 5.0 Lollipop Firmware running on Galaxy S5 SM-G900I. Continue reading the tutorial for complete guide.

 
After updating official firmware, your device no longer belongs to rooted device. So, after official firmware update, many of us prefer to root our device to enjoy
some additional features that unrooted android device doesn't offer. With a
rooted android device, you can install apps that ask root permission, flash
various custom ROMs, install MODs and tweak various features. Root removes
default bloatware apps that free-up lots of memory space and extend the battery
life. However, once rooted, manufacturer warranty will be void. But
you can regain the warranty by following proper unroot process.

Root Samsung Galaxy S5 SM-G900I
 
So,
want to root Galaxy S5 SM-G900I Running G900IZTU1BOA1 5.0 Lollipop Firmware? Continue reading this page to get all the
necessary steps to successfully root your device. The root file (CF-Auto-Root)
we used in this tutorial is safe and have nearly 100% success rate. We'll use
Odin software to flash the root file.
The
tutorial is made with simple step by step guide, so that even an android newbie
user can follow and successfully root his/her device. However, in this process
you may loss your personal data and settings. So, we recommend you to follow all
the backup instructions before proceed to rooting guide.

Warning!

  • This rooting tutorial is only applicable for Samsung Galaxy S5 SM-G900I
    model (klte). So, don't try this in any other android device. Check your device model
    number from- Settings-About Phone. 
  • Rooting voids your phone's manufacturer warranty. However, you can get back
    the warranty anytime by following proper unroot process or by flashing official firmware.
  • This guide is for educational purpose and you should try this at your own
    risk. We are not responsible if your device experience a soft brick after
    following this tutorial.

 Pre-Requisites:

  • Check battery percentage, charge your device to a decent level of at
    least 60% battery power. Your device should not turn
    off during installation.
  • Turn on USB Debugging mode,
    go to Settings-Developer Options-USB
    Debugging
  • Backup important data and
    settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver
All the above pre-requisites are very important and must be followed
before proceed to installation guide. Hope you get all the above points
and done as mentioned. Now, you are ready to move to the final step of
this tutorial where we have arranged a step by step details guide to root Galaxy S5 SM-G900I running  G900IZTU1BOA1 5.0 Lollipop firmware.

Steps to Root Galaxy S5 SM-G900I Running G900IZTU1BOA1 5.0 Lollipop through Odin:

 
  1. Download
    CF-Auto-Root for Galaxy S5 G900I and extract the Zip file: CF-Auto-Root-klte-kltedv-smg900i.zip
  2. Download Odin 3.09 and extract the Zip file: Odin3_V3.09.Zip
  3. Now, Switch off your phone and boot Galaxy S5 G900I
    into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot
    screen appear), now press Volume
    Up     key to proceed to Download Mode.
  4. Run the Odin3
    v3.09.exe     file as an administrator (Right click on the .exe file and click on
    Run as administrator)
  5. Now connect your Galaxy S5 G900I to your computer via USB
    cable
  6. In Odin3 screen, you should see a COM Port number
    like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your
    device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, click on the AP (PDA in older Odin) button and select the CF-Auto-Root-klte-kltedv-smg900i.tar.md5 file.
  9. Finally, click on the Start button to begin the rooting process, wait
    few moments.
  10. Once completed, you would see “PASS!” message in ID:COM port having green
    background
  11. Your phone should automatically reboot after
    completion
  12. You can now disconnect your phone from
    computer
  13. Finish

Install G386FXWUAOA1 Android 4.2.2 Jelly Bean Firmware for Galaxy Core LTE SM-G386F [Complete Guide]

G386FXWUAOA1 Android 4.2.2 Jelly Bean official firmware for Samsung Galaxy Core LTE SM-G386F is out and the users can now manually download the firmware zip file from here at NasirTech. Samsung time to time releasing software update for all their Android Smartphone and tablet devices and it is always recommended to update the latest available firmware for your device as with every new firmware version Samsung introduces fixes for bugs (if any), improvement in overall OS performance and sometime introduces new features. Continue reading this page to find G386FXWUAOA1 download link along with flashing instructions and rooting guide (if available).


 
 
 
 
 
 

G386FXWUAOA1 Firmware Details:

Model: SM-G386F
Model Name: Samsung Galaxy Core LTE
Version: Android 4.2.2 Jelly Bean
PDA: G386FXWUAOA1

G386FXWUAOA1 Download Link (s):

Note that: you can flash/install any firmware from the below list if the firmware for your country is not available, except those firmware comes with their carrier name.

Nordic Countries: G386FXWUAOA1_G386FNEEANL1_NEE.zip

 (Firmware for rest of the countries and carrier will be added here when available)
 
[Please don't ask for any torrent download link for the above firmware. However, if the above link doesn't work, you can mention in comment below, we'll try to provide you with other download mirror (if available)]

G386FXWUAOA1 Installation Methods:

There are several ways by which you can update the XWUAOA1 firmware on your Galaxy Core LTE G386F such as- through Samsung Kies utility (from your PC), Via OTA (Over the Air, directly from your device using WiFi) and Odin method (manually download firmware and flash through Odin). Below you'll find all the three methods. 

How to Update Official Firmware on Galaxy Core LTE SM-G386F via OTA (Over the Air):

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Go to Settings-About, and tap on the Update Option from there (If its show “The latest update have already been installed” message, then your device haven’t receive any OTA yet, check back later or try installing through Kies.)
  3. Tap OK to start the download and installation process
  4. Once done, your device will reboot automatically

How to Update Official Firmware on Galaxy Core LTE SM-G386F through Samsung Kies Utility:

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Download and Install Samsung Kies Utility on your PC
  3. Connect your device to PC through USB
  4. Open/Run Samsung Kies, it should automatically detect your device
  5. At the Samsung Kies home screen, you’ll see New Firmware Upgrade is available notification (If it show- “This is the last firmware”, then your device haven’t received the latest firmware on Kies, check back later or try flashing manually through Odin)
  6. Click on the Firmware Upgrade button to start the update process
  7. Follow onscreen instructions
  8. Once done, your device will be reboot automatically
  9. After reboot, you can disconnect your device from PC

How to Update G386FXWUAOA1 Firmware on Galaxy Core LTE G386F through Odin:

Kies and OTA are the official way to update firmware but most of us prefer manual way to update official firmware. So, below you’ll find step by step manual guide to update the XWUAOA1 4.2.2 Jelly Bean firmware on your Galaxy Core LTE G386F through Odin software on your PC or Laptop.

Warning!

"The firmware is released only for the Samsung Galaxy Core LTE SM-G386F model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. NasirTech is not responsible if anything wrong happens to your device after following this guide, try this at your own risk".

Points to be noted:

1) Check battery percentage, your device should have at least 60% battery power
 
2) Turn on USB Debugging mode, go to Settings-General-Developer Options (As the Developer options are hidden by default on all Android device running on Android 4.2 or up, So go to Settings-General-About on your Galaxy Core LTE and tap Build Number for 7 times to visible the Developer options.) See the image below.
 
Enable Developers Options
 
3) Backup important data and settings to external storage- follow this guide
 
4) Install USB driver for your device on your PC/Laptop- Download Samsung USB Driver  
 
5) If your Galaxy Core LTE G386F have any Custom ROM installed such as- CyanogenMod ROM, ParanoidAndroid ROM, AOKP ROM, SLIM ROM, PACman ROM, Avatar ROM, Omni ROM, LiquidSmooth ROM, Beanstalk ROM, Carbon ROM etc, then it’ll be replaced by stock firmware.
 
6) Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
 
7) After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

Steps to update G386FXWUAOA1 4.2.2 Jelly Bean firmware on Galaxy Core LTE G386F through Odin: 

1) Download XWUAOA1 4.2.2 Jelly Bean firmware for Galaxy Core LTE G386F from the above download section
 
2) Download Odin 3.09
 
3) Switch off and boot Galaxy Core LTE G386F into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.  
 
4) Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
 
5) Now connect your Galaxy Core LTE G386F to your computer via USB cable
 
6) In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
 
7) Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked in Odin.
 
8) Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
 
9) In Odin screen, click on AP (PDA in older Odin) button and select the firmware file with .tar.md5 extension (The firmware file look something like: G386FXXDLJ5_G386FODDDLI7_INU.tar.md5)
 
10) Now, click on the Start button to begin the installation process, wait few moments.
 
Odin3
 
11) Once completed, you would see “PASS!” message in ID:COM port having green background
 
12) Your device should automatically reboot after completion
 
13) You can now disconnect your device from computer
 
14) Finish
 
Hope you successfully completed the update process. If you followed everything as mentioned in the above tutorial, then your device should now running on Android 4.2.2 Jelly Bean build version number XWUAOA1. You can verify the firmware update details from Settings-About Phone.

Stuck at boot animation screen? Fix Bootloop on Galaxy Core LTE SM-G386F
If anything goes wrong, your device may stuck at booting animation. If your Galaxy Core LTE SM-G386F stuck at boot animation screen for more than 10 minutes, then follow these instructions:
  • Go to Recovery Mode by pressing and holding the Volume Up+Home+Power buttons together.
  • Now, perform Wipe Data/Factory Reset and Wipe Cache Partition task before selecting the reboot system now option. In Recovery Mode use the Volume keys to navigate between options and Power key to select any option.

Root G386FXWUAOA1 4.2.2 Jelly Bean Firmware: 

Tutorial to root G386FXWUAOA1 4.2.2 Jelly Bean firmware running on Samsung SM-G386F is not available at this moment. We'll update the link when available.
 
How to Root G386FXWUAOA1 Android 4.2.2 Jelly Bean Firmware

If you are looking for anything else related to the above firmware, then mention in comment below.

Update E250LKLUKNL1 Android 4.4.2 KitKat Firmware Download on Samsung Galaxy Note 2 SHV-E250L

E250LKLUKNL1 Android 4.4.2 KitKat official android firmware download for
Samsung Galaxy Note 2 SHV-E250L is out and the users can now manually download the firmware zip file from here. Samsung time to time releasing software update for all their Android
Smartphone and tablet devices and it is always recommended to update the latest
available firmware for your device as with every new firmware version Samsung introduces fixes
for bugs (if any), improvement in overall OS performance and sometime introduces
new features. Continue reading this page to find E250LKLUKNL1 download
link along with flashing instructions and rooting guide (if available).

 

E250LKLUKNL1 Firmware Details:

Model: SHV-E250L
Model Name: Samsung Galaxy Note 2
Version: Android 4.4.2 KitKat
PDA: E250LKLUKNL1

E250LKLUKNL1 Download Link (s):

Note that: you can flash/install any firmware from the below list if the firmware for your country is not available, except those firmware comes with their carrier name.Korea: E250LKLUKNL1_E250LLGTKNL1_LGT.zip
(Firmware for rest of the countries and carrier will be added here when available)
 
[Please don't ask for any torrent download link for the above firmware. However, if the above link doesn't work, you can mention in comment below, we'll try to provide you with other download mirror (if available)]

E250LKLUKNL1 Installation Methods:


There are several ways by which you can update the KLUKNL1 firmware on your Galaxy Note 2 E250L such as- through Samsung Kies utility (from your PC), Via OTA (Over the Air, directly from your device using WiFi) and Odin method (manually download firmware and flash through Odin). Below you'll find all the three methods. 

How to Update Official Firmware on Galaxy Note 2 SHV-E250L via OTA (Over the Air):

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Go to Settings-About, and tap on the Update Option from there (If its show “The latest update have already been installed” message, then your device haven’t receive any OTA yet, check back later or try installing through Kies.)
  3. Tap OK to start the download and installation process
  4. Once done, your device will reboot automatically

How to Update Official Firmware on Galaxy Note 2 SHV-E250L through Samsung Kies Utility:

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Download and Install Samsung Kies Utility on your PC
  3. Connect your device to PC through USB
  4. Open/Run Samsung Kies, it should automatically detect your device
  5. At the Samsung Kies home screen, you’ll see New Firmware Upgrade is available notification (If it show- “This is the last firmware”, then your device haven’t received the latest firmware on Kies, check back later or try flashing manually through Odin)
  6. Click on the Firmware Upgrade button to start the update process
  7. Follow onscreen instructions
  8. Once done, your device will be reboot automatically
  9. After reboot, you can disconnect your device from PC

How to Update E250LKLUKNL1 Firmware on Galaxy Note 2 E250L through Odin:


Kies and OTA are the official way to update firmware but most of us prefer manual way
to update official firmware. So, below you’ll find step by step manual
guide to update the KLUKNL1 4.4.2 KitKat firmware on your Galaxy Note 2 E250L
through Odin software on your PC or Laptop.

Warning!

"The firmware is released only for the Samsung Galaxy Note 2 SHV-E250L model, so don’t try this in any other android
device. Check your device model number from Settings-About Phone. Also
the tutorial is based on Windows PC. NasirTech is not responsible if
anything wrong happens to your device after following this guide, try
this at your own risk".

Points to be noted:

1) Check battery percentage, your device should have at least 60% battery
power
 
2) Turn on USB Debugging mode, go to Settings-General-Developer
Options (As the Developer options are hidden by default on all Android
device running on Android 4.2 or up, So go to Settings-General-About on
your Galaxy Note 2 and tap Build Number for 7 times to visible the
Developer options.) See the image below.
 
Enable Developers Options
 
3) Backup important data and settings to external storage- follow this guide
 
4) Install USB driver for your device on your PC/Laptop- Download Samsung USB Driver  
 
5) If your Galaxy Note 2 E250L have any Custom ROM
installed such as- CyanogenMod ROM, ParanoidAndroid ROM, AOKP ROM, SLIM
ROM, PACman ROM, Avatar ROM, Omni ROM, LiquidSmooth ROM, Beanstalk ROM,
Carbon ROM etc, then it’ll be replaced by stock firmware.
 
6) Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock
Recovery
 
7) After flashing official firmware, your device will no longer belongs to
rooted device. However you can root your device any time after flashing the
firmware.

Steps to update E250LKLUKNL1 4.4.2 KitKat firmware on Galaxy Note 2 E250L through Odin: 

1) Download KLUKNL1 4.4.2 KitKat firmware for Galaxy Note 2 E250L from the above download section
 
2) Download Odin 3.09
 
3) Switch off and boot Galaxy Note 2 E250L into Download Mode by
pressing and holding the Volume Down+Home+Power buttons (long press until the boot
screen appear), now press Volume Up key to proceed to Download Mode.  
 
4) Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as
an administrator (Right click on the .exe file and click on Run as
administrator)
 
5) Now connect your Galaxy Note 2 E250L to your computer via USB cable
 
6) In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM
section and “Added!” text at the message box. This means your device has been
detected by Odin3.
 
7) Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked in Odin.
 
8) Now, extract the downloaded firmware zip file, you’ll find a firmware file
with extension .tar.md5
 
9) In Odin screen, click on AP (PDA in older Odin) button and select the firmware file with
.tar.md5 extension (The firmware file look something like:
E250LXXDLJ5_E250LODDDLI7_INU.tar.md5)
 
10) Now, click on the Start button to begin the installation process, wait few
moments.
 
Odin3
 
11) Once completed, you would see “PASS!” message in ID:COM port having green
background
 
12) Your device should automatically reboot after completion
 
13) You can now disconnect your device from computer
 
14) Finish
Langganan: Postingan (Atom)